Brand： ニトリ
Peel-off magnet support plate (2 pieces)
Magnetic products can be attached to walls that do not have magnets. Can be repeatedly applied without leaving any marks on the wall. [Load limit] 1kg * Hanging from the ceiling or installing racks with the center of gravity away from the wall may not meet the load limit. [Materials] Main body = Stainless steel sheet Adhesive sheet = PET [How to install] 1. Wipe the wall with lukewarm water mixed with a mild kitchen detergent and dry. 2. Peel off the paper on the back side without touching the adhesive surface. 3. Press against the wall and rub the sheet to make it adhere. * Attach the auxiliary plate with the wide side of the adhesive sheet facing down or sideways. * Increase the number of auxiliary plates according to the number of magnets in the magnetic product. [How to remove] Hold the wide part of the adhesive sheet and slowly pull it off. * If you bend the adhesive sheet or roughly peel it off, it may deform and not be able to be used repeatedly. [Where it can be installed] Shiny flat surfaces Tiles larger than the suction sheet, stainless steel with no pattern, metal painted surfaces such as refrigerators and washing machines, plastic surfaces, transparent glass, steel products (cabinets, desks, partitions, etc.), printed plywood *Depending on the location, oil or shampoo may be attached. Wipe thoroughly with lukewarm water diluted with neutral kitchen detergent and dry thoroughly before installing. *Adhesive tape may not adhere well to some printed plywood. Rub the mounting wall with an eraser before installing. [Where it cannot be installed] Uneven, rough, matte or scratched surfaces Patterned tiles, patterned stainless steel, wooden walls, cloth walls, wallpaper, vinyl wallpaper, plaster, mortar, frosted glass, painted walls, painted plywood, etc. Places where water is directly splashed Places that become hot due to ranges, stoves, etc. [Precautions for use] In case of falling, do not hang valuables or fragile items or place them near the product. Do not use near fire. If there is dirt, dust, moisture, oil, wax, etc. on the wall, the sticker will not stick. Please observe the load limit. Avoid hanging it in a way that causes impact. When replacing or when the adhesive surface is very dirty, wash the adhesive surface with a neutral kitchen detergent, rinse thoroughly with water, and let it dry naturally before using. Source: https://www.nitori-net.jp/
商品詳細
-
商品名
Peel-off magnet support plate (2 pieces)
-
ブランド
ニトリ (NITORI)
-
サイズ
幅4.5×奥行0.3×高さ5cm
-
カラーバリエーション
Silver
-
素材
Stainless Steel Wire, PET
-
カテゴリー
cabinet
-
関連カテゴリー