Brand： ニトリ
Ultra Fine Bubble Shower Head (mitos stop)
Feels like it's passing through every strand of hair Save water with the hand-operated stop function. Saves water by about 50%. [Features] Ultra-thin straight water flow & wide shower Even with the popular scalp care shampoos, rinsing before and after shampooing is important. The ultra-fine, straight water flow wraps around the body for efficient washing. Fine shower holes to increase the force of the water RAINY shower holes have a diameter of 0.3 mm and 239 holes in total. By reducing the hole diameter, the force of the shower can be increased, and by increasing the number of holes, a finer and denser shower can be produced. [Cannot be installed] Cannot be used with balance boilers The mixer tap body or eccentric pipe does not have a backflow prevention mechanism (check valve) [Manufacturers that can be installed as is] SANEI LIXIL (INAX) (other than two-valve mixer taps) *When installing on a LIXIL (INAX) two-valve shower mixer, please add the gasket attached to the adapter T25 to the gasket on the hose nut side before use. M.Y.M. KAKUDAI TBC Some YUKO and Mizutani products *It can be installed on most manufacturers, but there may be cases where the above does not apply due to new products, changes in screw specifications, etc. We recommend that you check the compatibility with a screw tester at the store before purchasing. [Manufacturers that can be installed using the included adapter] TOTO (thin hose) adapter part number: T25 TOTO (thick hose) adapter part number: T25-2 KVX adapter part number: T25-3 *If your TOTO shower mixer faucet has a plastic shower elbow, replace it with a TOTO metal elbow and use the included adapter "T25-2". [Manufacturers that can be installed using a separately sold adapter] YUKO (If not installed as is) Adapter part number: PT25-10 Mizutani (If it cannot be installed as is) Adapter part number: PT25-9 LIXIL (INAX) Switch Shower Mixer Tap Adapter Part Number: PT25-4 [Material] Shower head: ABS resin, stainless steel Shower hose: PVC, nylon, polyester, brass, stainless steel Adapter: Polyacetal O-ring: EPDM Packing: EPDM/NBR [Maximum operating temperature] 60℃ [Water pressure used] 0.05MPa (flow pressure) to 0.75MPa (hydrostatic pressure) [Shower Info] Water saving rate: 50% * Measurement conditions (water saving rate): Flow rate at a water discharge force of 0.6 to 0.65N compared to the conventional optimum flow rate of 10L/min "based on the Building Energy Consumption Performance Standards" (when used in conjunction with the stop button) Skin contact: A little strong (compared to our own shower head) Spread: Wide (compared to our own shower head) Annual savings (approx.): 21,700 yen (gas: 13,900 yen, water: 7,800 yen) * Calculation conditions (savings amount): Calculated from the applicable values and examples of the eco-effects of hot water saving faucets (as of November 2018) [Handling Precautions] Do not use with mixer taps that do not have a backflow prevention mechanism (check valve). Backflow of hot and cold water may damage the hot and cold water mixer tap and hot water supply equipment. Be sure to check the temperature before using. If you stop the shower and then turn it back on, hot water may come out for 1 to 2 seconds. Also, do not use the shower with a water temperature of 60°C or higher. When stopping the water flow, open the shower head and always turn off the water at the faucet side. Otherwise, the shower hose may be damaged. Do not bend the hose forcibly or apply excessive force to it. Do not use the hose if it is bent. If the hose is damaged, water may leak, causing hot water to come out and causing burns. Please check whether it is compatible with the shower fixture. If it is not compatible, the shower head may come off the shower fixture due to the water pressure and hit you, causing injury. We recommend replacing it with our shower fixture. This product is for home shower faucets only. Do not use with solvents or chemicals other than water. Do not use for commercial purposes such as food processing, as it may be inappropriate. Depending on the piping equipment (large difference between cold water supply and hot water supply pressure, etc.), water pressure may fluctuate, causing the water temperature to rise suddenly during use. Please be careful as there is a risk of burns. After the water supply is stopped, water droplets may fall for a while; however, this is residual water inside the shower head and is not abnormal. Source: https://www.nitori-net.jp/
商品詳細
-
商品名
Ultra Fine Bubble Shower Head (mitos stop)
-
ブランド
ニトリ (NITORI)
-
サイズ
幅8.5×奥行16.5×高さ18.8cm
-
カラーバリエーション
white
-
素材
polypropylene, Calcium sulfite
-
備考
重量: 0.25 kg
-
カテゴリー
Bath items
-
関連カテゴリー